Knowledge in constructor
c++ constructor and destructor
c++ constructor and destructor
Aarish 1224
Java Class
This is file on classes and objects along with example and introduction. Methods and constructor are also explained.
kaushal shah
All Advance Formulae for Civil engineering Candidates
Contents Conversion Factor Beam formula Column formula Piles formula Concrete formula Timber Engineering Surveying Soil & earthquake formulae And many more.
Shivraj Balasaheb Roman
Objective Questions for CE Students
Material of Construction Building construction Surveying Mechanics Som SA And other important topics covered in this document
Project management for facility Constructions
Introduction Multiple projects management Contract organisation Contract administration Project management organisation Project information and communication management Project feasible Planning
A Guide to Civil engineering technology
This compact book has been prepared based on field experience and information collected from various hand books and standards of civil engineering. The aim is to provide maximum information which are required by a site engineer in day to day work in a compact form at one place. Please note that matter given is only for guidance and not an authentic document, In any project whatever standards and norms mentioned on drawings and in contract should be followed if any contradiction is found. please let us know if you're having any queries about above topic. thank you.
A Guide to Civil engineering technology
This compact book has been prepared based on field experience and information collected from various hand books and standards of civil engineering. The aim is to provide maximum information which are required by a site engineer in day to day work in a compact form at one place. Please note that matter given is only for guidance and not an authentic document, In any project whatever standards and norms mentioned on drawings and in contract should be followed if any contradiction is found. please let us know if you're having any queries about above topic. thank you.
Rate analysis sample
this file contains the sample of Rate Analysis also contains standard rates used for rate analysis this pdf is for reference and self study purpose only.
Analysis and Design of Multi Storied Building
this pdf contains a research paper on Analysis of Multistory building in Staad Pro contents Introduction Literature Review Working with Staad Pro Analysis of Stilt+ G+4 building Design of RCC of G+4 Building Staad pro input command file Design of Staircase, slab and footing Analysis and design results.
Civil engineering Handbook by Khanna
civil handbook khanna. You can find the complete book in the pdf attachment below. Though it is a scanned book but is clearly visible. It contains following Topics and Content: The Metric System Weights: Commercial Measures of Length Square Measures or Measures of Surface Cubic Measures Volume or Capacity Equivalents of Moments of Inertia & Section Moduli Sundry Units Indian Measures and Weight Power, work, energy, Heat and Force Specific Gravity and Specific Volume Miscellaneous Conversions Factors Thermometric Scales Weights of Building Materials Temperature Conversion Table Hope this would help you in getting success in your "Classes" and could be an "Insurance' to succeed.
Tips for creating and presenting a topshot Engineering paper
A. First, organize your talk:Read the entire paper at least 3 times-You need to be able to explain the details in the paper (even the ugly tricky notation) You need to be able to provide a critical analysis of the paper Check out references in the related work section of the paper. (this will help you put the paper in context of a larger body of work and will help you critique the paper's results/contributions)Find the important ideas- A paper has many details but only one or two main ideas; structure your talk around these main ideas.Create a Talk Outline- Your talk should be organized in a top-down manner. You should have the following main sections in your talk:Introduction, The Big Picture: what, why, how, and why we should care (motivation). Be sure to include:a statement of the problem being solved (what)motivation and putting the work in context (why and why should we care)a high-level view of the author's solution (how)Details of solutionResults demonstrating/proving their solutionCritic of Work (possibly compare to related work)Conclusions & Future Directions for this workThe talk should be organized as the important ideas first, the details second, conclusions last. Each section of your talk should be organized in a similar manor: high-level important points first, details second, summarize high-level points last. If the paper is well written, you can use the paper's organization as a guide.B. Design your slidesSlide Organization- Your slides should be organized like an outline--a few main points, with sub points under each one. Your slides are a guide for your talk not a word-for-word copy of your talk. List specific points that you want to talk about as sub-topics of each main topic. If there are particular details that you want to discuss, outline them on the slide and keep written notes for you to refer to in your talk rather than writing all the details on the slide.Summarize Main Points- You should have a summary slide of the main ideas at the end. If applicable, Include a list of open questions from the paperIt is okay to waste space- Add just enough prose prose to present the main points and highlight the main parts of each point. Use phrases rather than complete sentences and use large fonts. You can use acronyms and abbreviations sparingly, however you should say the complete name when you talk about about them. For example, if you abbreviate processes to procs on a slide, say "processes" when you talk about the point not "procs". Similarly, if your create an acronym for your super fast multi-cast implementation SFMC and refer to the old slow multi-cast implementation as OSMC, then say "our super fast multi-cast" and "the old slow multi-cast" rather than "SFMC" and "OSMC". The exception is for well-known acronyms such as PVM, MPI, API, JVM, etc.A picture is worth a thousand words- Use figures and graphs to explain implementation and results. It is very hard to describe a system implementation without having a picture of the components of the system. I once attended a talk about Intel's I64 architecture where the speaker tried to discuss the details of the layout of the chip and the interactions between the components without having any figures. It made for a very bad talk and a very hostile audience.Number of Slides- As a general rule, it should take 2-3 minutes to talk through the material on one slide, so for a 45 minute talk you should have about 20 slides. If there is too much material in a paper to present completely in 45 minutes, then pick one part (the most interesting/important part) that you will discuss in detail, and present the other parts at a higher level. You can create back-up slides for specific details that you don't plan to talk about, but may get questions about.C. Preparing your presentationProvide a talk road-map- Tell audience where you are going with your talk.Give audience a road-map of your talk at the beginning by using outline slides Immediately after the title slide, put up an outline slide and tell the audience the main organization of your talk. Another alternative is to first have a few slides motivating the paper's general topic, then put up an outline slide giving the audience a road-map of your talk.It should be clear when you start a new high-level part of your talk Use good transitions from one slide to the next, and from one main topic to the next..."We just talked about the implementation of foo now we will look at how well foo performs for synthetic and real workloads. You may want to use the outline slide at other points in your talk to provide a visual transition between parts.Repeat Your Point- There is a rule that says you have to tell your audience something three times before the really hear it:Tell them what you are going to say.Say it.Summarize what you said.This is particularly important for figures and graphs. For example: This graph show how the A algorithm performs better than the B and C algorithms as the number of nodes increaseThe X axis is number of nodes, the Y axis is execution time in seconds The red curve shows the execution time of A as the number of nodes increases The blue curve shows ...Thus you can see that as the number of nodes increases above N, the A algorithm performs better. This is because of increased message traffic in algorithms B and C as shown on the next slide...Explain concepts in your own words It is certainly okay to lift key phrases from the paper to use in your talk. However, you should also try to summarize the main ideas of the paper in your own words.Talk to the Audience Don't read your slide off the screen, nor directly off the projector. It is okay to stop for a second and refer to your notes if you need to.Practice Give a practice run-through of your talk. Stand in a room for 1 hour and talk through all your slides (out loud). This should be a timed dress rehearsal (don't stop and fix slides as you go). Members of your reading group should provide a practice audience for you.Nervousness: How to fight back A well organized, practiced talk will almost always go well. If you draw a blank, then looking at your slides will help you get back on track.Taking a deep breath will clam you down. One trick is to try to remember to take a deep breath between each slide.Slow down. Take a few seconds to think about a question that is being asked before you answer it. It is okay to pause for a few seconds between points and between slides; a second or two of silence between points is noticeable only to you, but if you are talking a mile a minute everyone will notice.Bring notes. if you are afraid that you will forget a point or will forget your elegant transition between slides 11 and 12, write these down on a piece of paper and bring it with you. However, you don't want to have a verbatim copy of your talk, instead write down key phrases that you want to remember to say.Give at least one practice talk to an audience.Be prepared to answer questions. You don't have to know the answer to every question, however you should be prepared to answer questions and able to answer most questions about the paper. Before you give the talk, think about what questions you are likely to get, and how you would answer them. You may want to have back-up slides ready for answering certain questions.It is okay to say "I don't know" or better yet "gee, I hadn't thought about that, but one possible approach would be to..." or to refer to your notes to answer questions.
Transportation engineering
this is a chapter conducted by Nptel on transportation engineering Traffic stream models Overview Greenshield's macroscopic stream model Calibration of Greenshield's model Greenburg's logarithmic model